admin管理员组

文章数量:1532473

2024年5月5日发(作者:)

跑步机说明书英文翻译

将电源插头插入家用AC 220V电源插座。

.The plug should be inserted into the AC 220V household power outlet.

2、仔细检查各连线,确认无误后通电,电子表蓝光显示“----”。放上安全开关系统

进入待机状态,电子表窗口显示为:心率显示“P”,其它均显示为“0”。

and confirm every wires are connected wellthen electrify the

machinethe top computer will display “----”in blue the safety keythe

system will enter the standby modethe window of the top top computer will

display:Ppulse and 0others.

3、待机状态下,按“启动暂停”键,系统进入手动运行状态,“时间”显示窗开始3

秒倒数后启动,系统将以1.0km/h的速度开始运行。按“加速”或“减速”键来变换运行

的速度,且伴有蜂鸣器的叫声。按住“加速”或“减速”键2秒钟可以连续动作,来调整

速度。本系统最高运行速度为12km/h最长运行时间99.59分钟,循环计时。

the “start/pause”key in the standby modethe system will enter the

manually operation modethe machine will start in the speed 1.0km/h after 3

seconds count backwards which displayed in the time FAST or SLOW

could change the speed with buzzing. Press and hold down the key for more than

2 seconds could adjust the speed highest speed of this system is

12km/hthe longest displayed time is 99.59 minutes diaplayed in circularly.

4、在运行状态下,按“停止”键或拿下安全开关,系统将会减速直到停止。

pressing STOP or take down the safety key in the operating

conditionthe system will slow down to stop.

5、在待机状态下,按“模式”键,即“时间、距离、卡路里”三种模式的设置(各小

窗口显示在闪动),按 “加速”“减速”键来设置相应的运动量参数。最后按“启动”键系

统进入模式运行状态。当你设置的运动量参数“SET”递减到0时,速度显示窗口显示“2.0”,

系统会发出“Bi”警报,速度会快速下降,系统就进入2.0km/h速度。

ng MODE key in the standby mode could set three

modes:TIME/DIATANCE/CALORIEwhich would twinkling in the each small

windowspress FAST/SLOW could set the sports parameterthen pressing START key

enter the the sports parameter descending to zerothe speed window

will display 2.0 and the system will alarm in “Bi” alarm soundthe speed will down

to 2.0km/h.

6、在待机状态下,按“程式”键,会有12种自动程式可供用户选择。P1为手动模

式白色,再按“加速”“减速”键来设置运动时间,最后按“启动/暂停”键开始运行。

ng PROGRAM in the standby modethere are 12 automatic program for

users choice.P1 is Manual Modein white colorpress FAST and SLOW to set exercise

timethen press START/PAUSE to start running.

P2-P12为自动模式,其中P2、P3、P4适合青少年橙色:P5、P6、P7适合家庭妇女、

本文标签: 系统状态显示减速运行