admin管理员组文章数量:1617564
方法一:采用高级重启的方式,点击打开链接
方法二:下载“EASYBCD”软件;
注:bcd —— boot configuration data,启动配置数据。如果需要知道BCD各参数的当前设定值,可以用管理员身份打开CMD,运行”bcdedit /enum“即可。有关BCDEDIT各参数的更多信息,可以访问:https://technet.microsoft/en-us/library/ff542202.aspx和https://technet.microsoft/en-us/library/cc721886(v=ws.10).aspx。
方法三:
参考:win8下如何按F8进安全模式
1,按“windows键+X”,选择“电源选项”
2,选择“选择电源按钮的功能”->“更改当前不可用的设置”,取消“启用快速启动”。
3,用管理员方式运行“cmd”。
4,输入“bcdedit /set {default} bootmenupolicy legacy”。
5,重启电脑,按F8,即可选择关闭“数字签名验证”。
6,如需恢复,可输入“bcdedit /set {default} bootmenupolicy standard”。
方法四:
1,用管理员身份运行CMD。
2,输入命令:“bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS”,不需要双引号,回车。
3,再输入命令:“bcdedit -set TESTSIGNING ON”,不需要双引号,回车。
4,重启电脑,即可关闭数字签名验证。
此时,系统进入的是测试模式,在桌面会有一个“水印”,如果需要去除水印,可以百度下载“My_WCP_Watermark_Editor.exe”软件。
1,下载“My_WCP_Watermark_Editor.exe”软件。
2,双击直接执行。
3,选择去除各种水印,并按“apply..."即可。
参考外文:
Disabling Driver Signature Enforcement In Windows 8 Permanently
Step 1. Open the Windows command promt as “Run as Administrator”.
Step 2. Run “bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS” (without the “”).
Step 3. To finalize the process run “bcdedit -set TESTSIGNING ON” (without the “”).
Step 4. Reboot and you’re done.
To disable it do step 1 and run these commands on step 2 and 3:
Step 2. “bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS” (without the “”)
Step 3. “bcdedit -set TESTSIGNING OFF” (without the “”)
Then do step 4 and you’re done.
版权声明:本文标题:Win10驱动数字签名的解决办法 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dianzi/1728760181a1171975.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论