admin管理员组文章数量:1532746
2024年5月8日发(作者:)
Juniper路由器密码恢复:
如果路由节点的Root密码丢失,而且没有其他的超级用户权限,那么就需要执行密码恢复,
该操作需要中断路由节点的正常功能。
要进行密码恢复,请按照下面操作进行:
(1).重新启动路由节点。
(2).在启动过程中,console上出现下面的提示的时候,按任意键中断正常启动方式,然后
再进入单用户状态:
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in
< Press any key other than return >
ok boot –s // boot -s需要手工输入
注:有时候“any other key for command prompt”这里可能是按space键。具体请根据
提示操作。
(3).执行密码恢复:在以下提示文字后输入recovery
Enter full pathname of shell or 'recovery' for root password recovery or RETURN for
-----
/bin/sh: recovery // 手工输入recovery
NOTE: Once in the CLI, you will need to enter configuration mode using
NOTE: the 'configure' command to make any required changes. For example,
NOTE: to reset the root password, type:
NOTE: configure
NOTE: set system root-authentication plain-text-password
NOTE: (enter the new password when asked)
NOTE: commit
NOTE: exit
NOTE: exit
NOTE: When you exit the CLI, you will be asked if you want to reboot
NOTE: the system
Starting CLI ...
-----
root>
(4).进入配置模式,删除root密码:
root> configure
Entering configuration mode
[edit]
root# delete system root-authentication
root@router# commit
commit complete
[edit]
root@router# exit
Exiting configuration mode
root@kenny> exit
Reboot the system? [y/n] y
-----
Terminated
(5).重新启动后,配置新的root密码。路由节点恢复正常。
-----
版权声明:本文标题:Juniper路由器密码恢复 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dongtai/1715177773a439136.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论