TP-Link Omada Gigabit VPN 路由器(带 PoE+ 端口和控制器)说明书_百

admin管理员组

文章数量:1533917

2024年5月13日发(作者：)

1

Package Contents

Router

Power Adapter

© 2022 TP-Link 7106509940 REV1.0.1

Installation Guide

Omada Gigabit VPN Router

with PoE+ Ports and Controller Ability

Rubber Feet

Installation Guide

Note: The image may differ from the actual product.

1

Hardware Overview

2

Front Panel

Speed LEDPoE LED

LED

PWR

SYS

CLOUD

Indication

On: Power is on.

Off: Power is off.

Flashing: System is running normally.

On/Off: System is running abnormally.

On: The device is bound to a TP-Link ID.

Slow Flashing: The device is connected to cloud but not bound to a TP-Link ID.

Quick Flashing: The device is being reset to its factory default settings.

Off: The device is disconnected from cloud.

On: The remaining PoE power is ≤ 7 W.

Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.

Off: The remaining PoE power is > 7 W.

Green On: Connecting to a device but no activity.

Off: No device connected to the corresponding port.

Flashing: Transmitting or receiving data.

Green On: Running at 1000 Mbps, but no activity.

Green Flashing: Running at 1000 Mbps and transmitting or receiving data.

Amber On: Running at 100/10 Mbps, but no activity.

Amber Flashing: Running at 100/10

Mbps and transmitting or receiving data.

Off: No device is linked to the corresponding port.

Green On: Running at 1000 Mbps, but no activity.

Green Flashing: Running at 1000 Mbps and transmitting or receiving data.

Amber On: Running at 100/10 Mbps, but no activity.

Amber Flashing: Running at 100/10 Mbps and transmitting or receiving data.

Off: No device is linked to the corresponding port.

Green On: The port is supplying power normally.

Green Flashing: Overload or short circuit is detected.

Off: Not providing PoE power on the port.

LEDSFP Slot1 Gbps RJ45 Port

Back Panel

Kensington

Security Slot

RESET

Grounding TerminalPower Socket

PoE Max

Link/Act

(SFP WAN/LAN)

Link/Act

(Port 3-4)

Kensington Security Slot: Secure the lock (not provided) into the security slot

to prevent the device from being stolen.

Speed

(Port 5-12)

RESET: Press and hold the button for 5 seconds, the SYS LED will flash quickly,

indicating the device is being reset to its factory default settings.

Grounding Terminal: The router comes with lightning protection mechanism.

Power Socket: Connect to the power outlet via the provided power adapter.

PoE

(Port 5-12)

3

Hardware Connection

1

Connect via Ethernet

Intern

et

Modem

Connect to RJ45 WAN Port

Connect via fiber network

Intern

et

Fiber-Optic Cable

Connect to SFP WAN Slot

Optical Module

4

Software Configuration

1

Typical Network Topology

1. Connect a computer to a LAN port of the router with

an RJ45 cable properly. If your computer is config-

ured with a fixed IP, change it to Obtain an IP

address automatically.

Router

2. Open a web browser and type the default manage-

ment address 192.168.0.1 in the address field of

the browser, then press the Enter key.

started with the Omada Setup Wizard to set up

the network.

EAPEAPEAPHost PC

the network setup is complete, click Finish to

configure more settings and manage your network.

For detailed configurations, refer to the User Guide

of the router. The guide can be found on the down-

load center of our official website:

/support/download/.

Clients

More management methods

Omada App

With the Omada App, you can also manage your network at a

local site or a remote site via your mobile device.

or

Omada Cloud Portal

You can also remotely access the device through Omada

Cloud Portal. Follow the steps below.

a. Enable Cloud Access on the setting page on the controller

and bind a TP-Link ID to your controller. If you have

configured this in the setup wizard, skip the step.

b. Launch a web browser and enter

in the address bar.

Scan for Omada App Omada App

c. Enter your TP-Link ID and password to log in. A list of

controllers that have been bound with your TP-Link ID will

appear. Then you can click Launch to further configure the

controller.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit to join TP-Link

Community.

For technical support and other information, please visit

/support, or simply scan the QR code.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC,

2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

/en/support/ce/.

EU Declaration of Conformity

Safety Information

Keep the device away from water, fire, humidity or hot environments.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Place the device with its bottom surface downward.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and

Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at

/support/ukca/

UK Declaration of Conformity

Adapter shall be installed near the equipment and shall be easily accessible.

本文标签： 说明书端口控制器