admin管理员组文章数量:1537549
http://acer.it168/thread-1918776-1-1.html
1.插入u盘。插入u盘之后,运行附件中bootice。确认bootice中已经显示出了u盘。如下图所示,有显示usb:xxxx
2.确认bootice读取到u盘之后,点主引导记录,然后选择GRUB for DOS O.4.5.a,然后点安装配置
3.按照下图所示,勾选最上面两个选择后,点写入磁盘
4.把我提供的u盘多系统引导菜单.rar压缩包里面的文件解压 到u盘根目录。解压后文件如图所示。
到此,u盘准备的工作完成。下面请看2L,如果添加系统镜像到u盘多系统启动菜单
接着上面的,u盘准备工作做好之后,下面就是将系统镜像添加到u盘多系统启动菜单了。
下面我以添加一个叫做pe.iso的文件为例。
1.将pe.iso文件复制到u盘根目录下,名为iso的文件夹。
2.用txt打开u盘根目录的menu.lst。
3.按照我上面的例子,最后改成下面的样子
title [1] 启动pe
fallback 0
find --set-root /iso/pe.iso
map /iso/pe.iso (0xff) || map --mem /iso/pe.iso (0xff)
map --hook
chainloader (0xff)
4.如果还想添加第二个启动项,继续按照2、3的步骤,修改menu.lst即可。当修改完成之后,保存menu.lst。到此u盘多系统启动菜单就做好了。
5.对于win7的镜像来说,不能使用2、3的步骤写法。我们需要将win7的系统镜像解压u盘跟目录
menu.lst文件部分修改如下
title [1] 安装 Win7
fallback 0
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
6.最后,给个做好的启动菜单menu.lst中的全部代码
checkrange 0x21 read 0x8280 && pxe detect NotExist
timeout=10
default=0
gfxmenu /GrubFiles/message
configfile (md)4+8
title [1] 安装 Win7
fallback 0
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
title [2] 启动小马PE
fallback 0
find --set-root /iso/pe_ma.iso
map /iso/pe_ma.iso (0xff) || map --mem /iso/pe_ma.iso (0xff)
map --hook
chainloader (0xff)
本文标签: 启动盘系统启动系统booticegrub4dos
版权声明:本文标题:bootice制作grub4dos的u盘多系统启动(pe、系统启动盘)(未验证) 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dongtai/1726959104a1091884.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论