admin管理员组文章数量:1635684
linux 路由表
[root@centos6 ~]#route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.27.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
0.0.0.0 192.168.27.2 0.0.0.0 UG 0 0 0 eth0
linux 路由表主要字段说明
Destination: 目的地址,可以是主机地址、网络地址,常用的是网络地址
Gateway: 网关地址,所有未知地址都会找网关,有网关统一转发,只有边缘网络才会配置网关,并且直连网络不需要配置网关
Genmask:目的地址的子网掩码
Iface: 接口,去往目的地址的网络路径的出口(也就是从那个出口可以去往目的地址)
官方的原文
OUTPUT
The output of the kernel routing table is organized in the following columns
Destination
The destination network or destination host.
Gateway
The gateway address or '*' if none set.
Genmask
The netmask for the destination net; '255.255.255.255' for a host destination and '0.0.0.0' for the default route.
Flags Possible flags include
U (route is up)
H (target is a host)
G (use gateway)
R (reinstate route for dynamic routing)
D (dynamically installed by daemon or redirect)
M (modified from routing daemon or redirect)
A (installed by addrconf)
C (cache entry)
! (reject route)
Metric
The 'distance' to the target (usually counted in hops).
It is not used by recent kernels, but may be needed by routing daemons.
Ref
Number of references to this route. (Not used in the Linux kernel.)
Use
Count of lookups for the route.
Depending on the use of -F and -C this will be either route cache misses (-F) or hits (-C).
Iface
Interface to which packets for this route will be sent.
MSS
Default maximum segment size for TCP connections over this route.
Window
Default window size for TCP connections over this route.
irtt
Initial RTT (Round Trip Time).
The kernel uses this to guess about the best TCP protocol parameters without waiting on (possibly slow) answers.
HH (cached only)
The number of ARP entries and cached routes that refer to the hardware header cache for the cached route.
This will be -1 if a hardware address is not needed for the interface of the cached route (e.g. lo).
Arp (cached only)
Whether or not the hardware address for the cached route is up to date.
linux 路由配置示例
路由器 R1 路由表
网络ID
子网掩码
接口
网关
10.0.0.0
255.0.0.0
1
-
172.16.0.0
255.255.0.0
2
-
192.168.0.0
255.255.255.0
2
172.16.0.2
192.168.100.0
255.255.255.0
2
172.16.0.2
0.0.0.0
0.0.0.0
2
172.16.0.2
路由器 R2 路由表
连接互联网的路由信息省略 只有边界路由才有 默认路由 0.0.0.0/0.0.0.0 gateway_ip R2 不是边界路由,所以没有默认路由 只有 R1 R3 才有默认路由,可以进行路由合并
网络ID
子网掩码
接口
网关
10.0.0.0
255.0.0.0
3
172.16.0.1
172.16.0.0
255.255.0.0
3
-
192.168.0.0
255.255.255.0
4
-
192.168.100.0
255.255.255.0
4
192.168.0.2
路由器 R3 路由表
网络ID
子网掩码
接口
网关
10.0.0.0
255.0.0.0
5
192.168.0.1
172.16.0.0
255.255.0.0
5
192.168.0.1
192.168.0.0
255.255.255.0
5
-
192.168.100.0
255.255.255.0
6
-
0.0.0.0
0.0.0.0
5
192.168.0.1
版权声明:本文标题:边界路由linux,路由表构成简介(DestinationGatewayGenmaskIface) 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dongtai/1729214314a1190241.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论