admin管理员组文章数量:1531792
2024-07-27 作者:
About Warnings
WARNING:
A WARNING indicates a potential for property damage, personal injury, or death
Dell™ AY511 Soundbar User's Guide
WARNING:
To power the soundbar, use only the DC 12 V power adapter that shipped with your soundbar.
Setting Up the AY511 Soundbar
To set up the soundbar:
1Align the tabs on the soundbar with the notches at the bottom of the display.2Slide the soundbar in the direction indicated by the arrows in the illustration,
until the soundbar snaps into place.3Connect the power adapter to your soundbar.4Connect the black mini stereo connector from the soundbar to the green
headphone or line-out connector on your computer. WARNING:
Use the soundbar only with the appropriate power source indicated on
the marking label. If you are not sure of the type power supply, consult the product dealer or the local power company.
5Touch the power on/off control on the front panel to turn on the ing the Volume Level
•Increase the volume — To increase the volume, touch the control on the
front panel. The LED between the speakers blinks to indicate a change in the
volume se the volume — To decrease the volume, touch the control on the
front panel. The LED between the speakers blinks to indicate a change in the
volume — To mute or unmute audio, touch the control on the front panel.••Connecting to a Headphone or Other Audio Player Source (Optional)
Connect your soundbar to a headphone or other audio player source using the audio out/headhpone connector or the line-in connector on your soundbar.
Connecting to a Subwoofer (Optional)
Connect your soundbar to an external subwoofer using the subwoofer output connector on your soundbar.
SRS Functions of the Soundbar
The SRS functions available on your soundbar enhances the audio output.•SRS TruSurround — Delivers a compelling, virtual surround sound
experience through your two speaker premium soundbar enable SRS TruSurround, touch the TruSurrond control on the front TruBass — Enhances bass performance by utilizing proprietary
psychoacoustic techniques. These techniques restore the perception of
fundamental low frequency tones by dynamically augmenting harmonics,
which are easily reproduced by contemporary loudspeakers.
To enable SRS TruBass, touch the TruBass control on the front Dialog Clarity — Enhances signal clarity and improves the audio output
when used with home entertainment systems.
To enable SRS Dialog Clarity, touch the SRS Dialog Clarity control on the
front panel.••Troubleshooting
NOTE:
Ensure that the soundbar is powered using the DC 12V adapter. Do not replace
the power adapter separately. The power adapter and soundbar must be replaced as a unit.
ProblemNo audio
ObservationNo power to the
sound bar—the
power indicator is off.
Possible Solutions
•Turn on your soundbar by touching
the power control; verify if the power
indicator (white LED) on the front
of the sound bar lights up.
Ensure that the power adapter is
connected to an electrical outlet
that is known to be working.•ProblemNo audio
ObservationSoundbar has
power—power indicator is on.
Possible Solutions
•Ensure that the audio cable is
connected to your computer's audio
out connector.
Set all volume controls in your audio
application and Microsoft®
Windows® operating system to
their maximum.
Play audio on your computer (for
example, an audio CD, or MP3).
Increase the volume level on the
soundbar by touching the volume up
control. The white LED blinks when
the control is ect the audio line-in
connector to the the soundbar using another
audio source (for example, a
portable CD player).On your computer, open the
Control Panel and click Sound.
Ensure that the computer on-board
audio or the sound card is enabled.
Try different ports. Reinstall the on-board audio or the sound card
drivers. Restart the computer. Test
the audio output using a speaker
that is known to be working.
••••••ProblemDistorted sound
ObservationComputer's sound
card is used as the audio source
Possible Solutions
••Remove any obstructions between
you and the that the audio cable
connector is completely inserted
into the audio out connector of the
audio the volume controls on the
Windows operating system to their
mid se the volume level on the
audio application.
Decrease the volume level of the
soundbar by touching the
and reconnect the audio
cable to your computer and
eshoot the computer's sound
card.
Test the soundbar using another
audio source (for example, a
portable CD player)Decrease any EQ or other sound
effect setting of the audio source
sound card to a lower level (if any).Ensure that the soundbar is properly
mounted on the that no loose objects are
touching the soundbar.•••••••••ProblemDistorted sound
ObservationOther audio source is used
Possible Solutions
••Remove any obstructions between
you and the that the audio cable
connector is completely inserted
into the audio out connector of the
audio source (for example, a
portable CD player) .Decrease the volume level on the
audio application.
Decrease the volume level of the
soundbar by touching the
and reconnect the audio
cable to the audio source from the
se any EQ or other sound
effect setting of the audio source to
a lower level (if any).Ensure that the soundbar is properly
mounted on the that no loose objects are
touching the soundbar.••••••ProblemObservationPossible Solutions
Unbalanced audio Audio is heard
•outputfrom only one side
Remove any obstructions between
you and the volumeof the soundbar
Volume is too low•Ensure that the audio cable
connector is completely inserted
into the audio out connector of the
sound card or audio source.•Set the audio balance controls on
the Windows operating system to
their mid points.•Remove and reconnect the audio
cable to your computer and
soundbar.•Troubleshoot the computer's sound
card.
•Test the soundbar using another
audio source (for example, a
portable CD player).
•Remove any obstructions between
you and the soundbar.•Increase the volume level on the
soundbar by touching the icon.•Increase the volume controls on the
Windows operating system to their
maximum.•Increase the volume level on the
audio application if other audio
application software is used.
•Test the soundbar using another
audio source (for example, a
portable CD player). ProblemBuzzing noise
ObservationRattling or
buzzing noise is
heard when playing audio
while the soundbar
is attached to the display.
Possible Solutions
•Tilt the monitor angle and ensure
that the soundbar does not touch
monitor stand or se the volume level.•For the latest supported display models, visit
/support/edocs/acc/AY511
Information in this document is subject to change without notice.©htsreserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows
are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
SRS TruBass, SRS TruSurround XT and SRS Dialog Clarity are trademarks of SRS Labs, Inc.
TruBass, TruSurround XT and Dialog Clarity technologies are incorporated under license from SRS Labs, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
本文标签: 戴尔AY511 声霸用户指南说明书
版权声明:本文标题:戴尔AY511 声霸用户指南说明书 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/shuma/1722084644a915695.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论