admin管理员组文章数量:1530263
2024年6月10日发(作者:)
Operand Definitions
ZEMAX supports optimization operands which are used to define the merit function. Each
operand may be assigned a weight which indicates the relative importance of that operand, as well
as a target, which is the desired value for that operand. The operands are listed below.
ABSO: Absolute value
ACOS: Arccosine
AMAG: Angular magnification
ANAR: Angular aberration
ASIN: Arcsine
ASTI: Astigmatism
ATAN: Arctangent
AXCL: Axial color
BLNK: Blank
BSER: Boresight Error
COGT: Conic greater than
COLT: Conic less than
COMA: Coma
CONF: Configuration #
CONS: Constant
COSI: Cosine
COVA: Conic value
CTGT: Center thickness greater than
CTLT: Center thickness less than
(间隔)大于
中心厚度(间隔)小于
中心厚度
CTVA: Center thickness value 中心厚度(间隔)等于
CVGT: Curvature greater than 曲率大于
CVLT: Curvature less than 曲率小于
CVOL: Cylinder volume
CVVA: Curvature value 曲率等于
DENC: Diffraction encircled energy
DENF: Diffraction encircled energy fraction
DIFF: Difference
DIMX: Distortion max 最大畸变
DISC: Distortion calibrated
DISG: Generalized distortion
DIST: Distortion 畸变
DIVI: Division
DLTN: Delta N
DMFS: Default merit function start 默认评价函数起始点
DMGT: Diameter greater than
DMLT: Diameter less than
DMVA: Diameter value
DXDX: Derivative Dx/Dx
DXDY: Derivative Dx/Dy
DYDX: Derivative Dy/Dx
DYDY: Derivative Dy/Dy
版权声明:本文标题:zemax常用评价函数操作数 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/xitong/1718008466a633784.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论