admin管理员组文章数量:1532337
2024年7月2日发(作者:)
1
©2019 TP-Link
7106508497 REV1.1.1
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.
Power On
Quick Installation Guide
Range Extender
Next to
Scan the QR code, or visit
/s
upport/setup-video/
and search for the setup v
ideo of your model.
*Images may differ from a
ctual product.
Need setup videos?
Solid On
2
Set Up
Method 1: Via the Tether AppMethod 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender. If you are
using a computer, unplug the Ethernet cable if any.
Method 3: Via the WPS Button
1. Press the WPS button on your router. 1. Get the up-to-date Tether app.
or
Scan for TetherTether
The WPS button might
look like one of these:
TP-Link_Extender
√
2. Connect your smartphone to the extender’s
network TP-Link_Extender.
Connect automatically
Connect
< Settings
Wi-Fi
Wi-Fi
CHOOSE
TP-Link_Extender
2. Launch a web browser, and enter
or 192.168.0.254
in the address bar. Create a password to log in.
Note: If the login window does not appear, refer to FAQ > Q1.
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The LED should change
from blinking to solid on, indicating successful
connection.
Note: If the LED does not turn solid on, try again or use Method 1
or 2.
3. Launch the Tether app, and select your extender.
Create a password to log in.
My Devices
Local Device
Low
Create Password
MiddleHigh
Confirm Password
Start
BlinkingSolid On
REXXX
XX-XX-XX-XX-XX-XX
3. If the extender connects to a dual band router,
repeat steps 1 and 2 above to connect to the
other band.
Extended Network Names:
Router’s network name with
_EXT at the end
Passwords:
Same as your router
Note: If you want to change the extended network
names, refer to Manage the Extender on the back
page.
4. Follow app instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
Note: If the LED does not turn solid on, refer to FAQ > Q2.
3. Follow web instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
Note: If the LED does not turn solid on, refer to FAQ > Q2.
Solid On
Solid OnSolid On
If you cannot find the network names with _EXT in
your Wi-Fi network list, this means that the
extender has been connected to a OneMesh router
and automatically copied its Wi-Fi settings. See
back for more information.
3
Relocate
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid green. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Tip: For more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.
Router
Halfway
Green: Suitable location
Red: Too far from router
Devices
Enjoy the internet!
Manage the Extender
Note: If your extender and router use the same network name, Method 1 is recommended.
After setup, you can manage the extender via any of the methods below.
LED Explanation
5GHz
2.4GHz
Signal
Ethernet
Power
WPS
Method 1: Via the Tether App
3. Manage the extender as needed.
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
Method 2: Via a Web Browser
2. Launch a web browser, enter in the address bar, and
log in.
3. Manage the extender as needed.
Note: If the login window does not appear, refer to FAQ > Q1.
1. Connect your computer or smartphone to the extender’s network
.
If you are
using a computer, unplug the Ethernet cable if any.
LED
5GHz
2.4GHz
Status
On/Off
On/Off
Solid green
Indication (For Range Extender Mode)
The extender is connected or not connected to the
5GHz wireless network of your host router.
The extender is connected or not connected to the
2.4GHz wireless network of your host router.
The extender is connected to your router’s wireless
network and is in a suitable location.
The extender is experiencing poor signal strength.
Try relocating it closer to your router.
No wireless connection is established.
The Ethernet port is connected or not connected
to a powered-on device.
The extender is on or off.
The system is starting up or firmware is being
upgraded.
WPS connection is established.
WPS connection
is in progress.
WPS connection has been established for more
than 5 minutes or WPS connection failed.
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible
speeds thanks to OneMesh’s seamless coverage.
Unified Wi-Fi Network
Seamless Roaming
Router and extenders share the same wireless settings, including network name, password,
access control settings and more.
Devices automatically switch between your router and extenders as you move through your
home for the fastest possible speeds.
OneMesh with Seamless Roaming
TM
(Signal)
Solid red
Off
(Ethernet)
On/Off
On/Off
Easy Setup and Management
(Power)
Blinking
On
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the
Tether app or at your router’s web management page.
To check full list of TP-Link OneMesh devices, scan the QR code,
or visit /One-Mesh/compatibility.
(WPS)
Blinking
Off
Q1. What should I do if I cannot access the extender’s web
management page?
Q3. How do I reset the extender?
Make sure your computer or smartphone has connected to the extender’s
network, and not that of your router. If your router and extender share the same
network name, connect your computer to the extender via an Ethernet cable, or
use the Tether app.
If you are using a computer, make sure it is set to obtain an IP address and DNS
server address automatically.
Verify that or 192.168.0.254 is correctly entered
in the web browser and press Enter. Note that 192.168.0.254 applies only
for extenders with factory default settings.
Use another web browser and try again.
Reboot or reset the extender and try again.
If you are still having problems, contact our technical support.
With the extender powered on, use a pin to press the RESET button for 1
second. The extender will reboot.
RESET
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
Safety Information
You may have entered incorrect Wi-Fi passwords for your host networks during
the configuration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of
conformity may be found at /en/ce.
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
For technical support,
the user guide and oth
er information, please
visit
/support/
, or simply scan the QR
code.
版权声明:本文标题:TP-Link RE220 无线扩展器快速安装指南说明书 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/xitong/1719934480a809531.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论