admin管理员组文章数量:1532461
2024年7月10日发(作者:)
Installation Guide for hp Deskjet 5600 Printer Driver
hp Deskjet 5600 printer driver, which is pre-installed in the analyzers such as E4991A,
E5052A, E5061A/62A and E5070B/71B (Refer to **“Supported Printers” for more details), can
be used as the printer driver for the supported printers such as C5280, D5360, D7160,
D5160,7850, 7830. The installation procedure of the driver is as follows.
1. Turn on the printer and the analyzer.
2. Connect the printer to the analyzer with the USB cable.
3. "Found New Hardware Wizard" appears. Click "Next".
4. Select "Display a list of the known devices..". Click "Next".
5. Select "Printers" and Click "Next".
6. Select "Hewlett-Packard" and "hp deskjet 5600 series". Click "Next".
7. Ignore "Update Driver Warning" and Click "Yes".
8. Click "Next".
9. Click "Finish". (Ignore the error message)
10. After a few seconds, the new window of "Found New Hardware Wizard" may appear again.
Repeat the procedure from 3 to 9 until moving to the step 11.
11. The printer driver has been successfully installed. Click "Finish".
Note1: When executing print while the LED of the printer turns on and off, you may
encounter the error in printing. In this case, wait until the LED turns on, for the printer to
get ready for the next action. (It takes about one minute.)
Note2: When printing the next screen image, wait for around 90 seconds until the printer job
status is completely deleted in printer queue window. (Press “System”-“Misc setup”-“Control
Panel”-“Printers”-“hp deskjet 5600 series”)
(ex.) The error message on the ENA (E5070B/71B)
**“Supported Printers”
/agilent/?action=doc&lc=eng&cc=US&id=1000002
883-1%3Aepsg%3Aman<ype=External%20File
版权声明:本文标题:惠普Deskjet 5600打印机驱动程序安装指南说明书 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/xitong/1720572549a831712.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论