admin管理员组文章数量:1532511
2024年7月10日发(作者:)
Connecting to a Smartphone Using a Direct Connection
see
the Canon
USA –PDF.
EOS Remote Installation Required
To communicate with a smartphone, the camera needs to be connected to the smartphone using the dedicated
application EOS Remote.
EOS Remote can be downloaded from the AppStore or Google Play. Install EOS Remote on the smartphone and
then perform the procedures to establish the connection.
To use EOS Remote, a smartphone on which iOS or Android installed is necessary. For information on supported
operating system, refer to the download site of EOS Remote software.
Please note that through this document pages in the product manual are referenced. Please see
the Canon
USA –Latin America Grop website to download the complete PDF.
Connecting to a Smartphone Using a Direct Connection
The camera and smartphone can be directly connected via wireless LAN.
Because the camera acts as an access point, no other access point is necessary, so you can establish
communications easily even when you are out.
To establish connection, operations on the smartphone are required. For details, refer to the
smartphone instruction manual.
Select [Wi-Fi function].
Under the [3] tab, set [Wi-Fi] to [Enable], then
select [Wi-Fi function].
Select [].
Select [] (Connect to smartphone) and press <
>.
Select [Camera access point mode].
Press the <> key to select [Camera access point
mode], then press <>.
Select [OK] and press <> to go to the next screen.
Select [Easy connection].
Press the <> key to select [Easy connection],
then press <>.
Select [OK] and press <> to go to the next screen.
For manual connection, see page 36.
Please note that through this document pages in the product manual are referenced. Please see
the Canon USA –Latin America
Grop website to download the complete PDF.
1,
Connecting to a Smartphone Using a Direct Connection
Connect the smartphone to the
camera.
On the Wi-Fi settings menu of the smartphone,
select the SSID (network name) displayed on
the cameras LCD monitor.
For the password, enter the encryption key
displayed on the camera's LCD monitor.
The next screen may be automatically displayed
even when the operation on the smartphone is
not completed.
Start EOS Remote on the
smartphone.
When the Wi-Fi settings are completed, start EOS
Remote on the smartphone.
Select [Camera Connection] on the
smartphone
.
Select [Camera Connection] on EOS Remote.
Select the target camera on the
smartphone.
Select the camera to connect to from the
[Detected Cameras] on EOS Remote.
Pairing starts.
Please note that through this document pages in the product manual are referenced. Please see
the Canon
USA –Latin America Grop website to download the complete PDF.
Connecting to a Smartphone Using a Direct Connection
Connect to the camera.
When pairing is completed, the screen on the left is
disabled. Press the <> key to select [OK], then
press<>.
To specify viewable images (p.40), press the
Non-alphanumeric characters are
displayed as □.
Perform further settings.
To finish settings in this stage, press the <> key
to select [OK], then press <> to go to step 11.
The change the name of the settings, select
[Settings name] and press <>.
The virtual keyboard is displayed (p.14). Up to 30
characters can be entered for the name of the
settings.
Save the settings.
Select [OK] and press <> to save the settings.
The [Connection] screen will be displayed.
To return to the menu, press the
发表评论