admin管理员组文章数量:1531696
@[TOC]win 10 安装时候无法格式化分区,错误 0x80070057
参考: https://www.partitionwizard/partitionmagic/windows-could-not-format-a-partition.html
方法2:
- 用U盘启动,后选择“修复windows”
- 选择 命令行
- Step 3. Type “diskpart”. This may take some time for it to pop up and it will ask you for Administrative privileges. Go ahead and click “Yes”;
Step 4. Type “list disk”. It will show a list of disks;
Step 5. Type “select disk [n]” to select your disk out of the list above. For example: “select disk 3”;
Step 6. Type “clean” to clean the drive;
Step 7. Type “create partition primary”; Step 8. Type “select partition 1”;
Step 9. Type “active” to activate the partition on the disk;
Step 10. Type “format fs=ntfs” to do a full format into NTFS. Depending on the size of the disk, this will take some time to complete.
Step 11. Type “exit” when the format is finished. We need to type “exit” for two times. One to exit from diskpart, and the other one for command prompt.
版权声明:本文标题:win 10 安装时候无法格式化分区,错误 0x80070057 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/xitong/1725407796a1022156.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论