admin管理员组

文章数量:1529446

contact groupbehavior command

Syntax

contact <sprocess> groupbehavior keyword

Primary keywords:

and | contact | or

Both contacts and pieces have group assignments. As a result, one may wish to filter a contact by the group assignment to either of its ends or both of the ends, or by its own group assignment. This command allows the user to specify the behavior of filtering contacts by group (default is or).

By default, only mechanical contacts are considered. If sprocess is specified, then it must correspond to a process name and contacts within this process are considered.

and

A contact is deemed to be in the range if both ends are within a group specified in the range.

contact

A contact is deemed to be in the range if the contact group is within a group specified in the range.

or

A contact is deemed to be in the range if either end is within a group specified in the range (default).

and关键词：只有接触两端都属于这个group才赋予这个接触

contact关键词：用于congtact group，用来进行接触的修改，删除？

or关键词：只要有一端接触属于这个group就赋予这个接触

本文标签： Contactgroupbehaviorcommand

版权声明：本文标题：contact groupbehavior command 内容由热心网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：https://m.elefans.com/xitong/1726640078a1079546.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。