admin管理员组文章数量:1658708
一. 官网对该伪列的说明
From:11gR2
Foreach row, ORA_ROWSCN returns the conservative upper bound system change number(SCN) of the most recent change to the row in the current session. Thispseudocolumn is useful for determining approximately when a row was lastupdated.
Itis not absolutely precise, because Oracle tracks SCNs by transaction committedfor the block in which the row resides. You can obtain a more fine-grainedapproximation of the SCN by creating your tables with row-level dependencytracking. Refer to CREATE TABLE ... NOROWDEPENDENCIES| ROWDEPENDENCIES for more information on row-level dependency tracking.
ROWDEPENDENCIESSpecify ROWDEPENDENCIES if you want to enable row-level dependency tracking.This setting is useful primarily to allow for parallel propagation inreplication environments. It increases the size of each row by 6 bytes.
NOROWDEPENDENCIESSpecify NOROWDEPENDENCIES if you do not want table to use the row-leveldependency tracking feature. This is the default.
也就是说,使用表的默认创建参数,即norowdependencies时,此时的ora_rawscn 取自data block header的SCN,那么这时候,对于同一个block里的row而言,他们的ora_rowscn 是一样的。
而在创建table时指定为rowdependencies时,那么会为每行row 保存一个ora_rowscn. 这样对于同一个block里的row,会有多个ora_rowscn 值。通过dump block,可以发现每个row 会多出一个dscn的信息,该信息就是用来保存ora_rowscn的。
如:
tab 0, row 1, @0×1f88
tl: 12 fb: –H-FL– lb: 0×2 cc: 1
dscn 0×0000.00000000
tab 0, row 1, @0×1f88
tl: 12 fb: –H-FL– lb: 0×0 cc: 1
dscn 0×0005.105a6cc1
这是同一个row的dump 信息,第一次dscn 为0. 此时信息是从itl的Scn/Fsc中获得的,当itl发生cleanout时会把Scn/Fsc刷到dscn,就是上面的第二段信息。具体这块后面会实验证明。
关于block dump 和 itl 说明,参考:
Oracle datafile block 格式 说明 http://www.linuxidc/Linux/2011-08/40286.htm
You cannot use this pseudocolumn in a query to a view.However, you can use it to refer to the underlying table when creating a view.You can also use this pseudocolumn in the WHERE clause of an UPDATE or DELETEstatement.
--不能在视图使用ora_rowscn伪列
ORA_ROWSCN is not supported for Flashback Query.Instead, use the version query pseudocolumns, which are provided explicitly forFlashback Query. Refer to the SELECT ... flashback_query_clausefor information on Flashback Query and "VersionQuery Pseudocolumns" for additional information on thosepseudocolumns.
--ora_rowscn 不支持Flashbackquery。
Restriction on ORA_ROWSCN: This pseudocolumn is notsupported for external tables.
--ora_rowscn 不支持外部表
Example:
Thefirst statement below uses the ORA_ROWSCN pseudocolumn to get the system changenumber of the last operation on the employees table.
SELECT ORA_ROWSCN, last_name
FROM employees
WHERE employee_id = 188;
--使用ORA_ROWSCN获取该row 最后一次更新时的SCN
The second statement uses the pseudocolumnwith the SCN_TO_TIMESTAMP function to determine the timestamp of the operation:
SELECTSCN_TO_TIMESTAMP(ORA_ROWSCN), last_name
FROM employees
WHERE employee_id = 188;
--使用SCN_TO_TIMESTAMP 和 ORA_ROWSCN,获取最后一次修改row的时间
二. ORA_ROWSCN 说明
ORA_ROWSCN伪列是Oracle10g引入的,可以查询表中记录最后变更的SCN。这个新的伪列在某些环境下会非常有用,比如执行乐观锁定,或者增量数据抽取的时候。但是,默认情况下,每行记录的ORA_ROWSCN是基于Block的,除非在建表的时候执行开启行级跟踪(createtable … rowdependencies)。
2.1 乐观锁和ORA_ROWSCN
需要select ... for update做悲观锁定的时候,通过使用ORA_ROWSCN可以改成乐观锁定。一开始select数据的时候将ORA_ROWSCN查出来,修改后如果要写回数据库之前再比对下最新的ORA_ROWSCN就可以知道这期间数据是否有发生变化。
2.2 增量数据抽取和ORA_ROWSCN
每次抽取后记录最大的ORA_ROWSCN,下次抽取再基于上一次的SCN来获得最近修改过的数据即可。在10g之前,很多系统要实现增量数据抽取,要么通过解析日志,要么加触发器,要么就在表上加一个时间截字段。
ORA_ROWSCN其实就是第三种方式,只是这个字段由Oracle来维护,这样可以避免一些应用绕过时间截去更新其他字段带来的问题。不过,如果系统中使用了逻辑备库或者streams等逻辑复制的方案,而数据抽取又是基于逻辑备库的话,ORA_ROWSCN就可能对抽取后的数据分析有影响了,因为通过这个得到的时间是逻辑备库上记录变更的时间,而不是源库的时间了。
当然,如果纯粹只是做数据抽取,而不需要使用这个时间来做分析,还是问题不大的,但还是要考虑一旦逻辑备库出现故障需要重做的,则这个增量抽取要怎么来处理的问题。
本文标签: mysqlrowscnOracleORAROWSCN
版权声明:本文标题:mysql的rowscn_Oracle ORA_ROWSCN 伪列 说明 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/xitong/1729813932a1213673.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论