admin管理员组文章数量:1530069
1 利用串口线接好电脑与路由器,
2 配置超级终端:9600 8 1;
3 新路由器的话,直接就进入了
4 大于号状态下输入 enable.回车
5 config
int gi0/0
ip address (公网IP) (公网子网掩码)
ip nat outside
q
int gi0/1
ip address (私网IP,如192.168.0.1) (私网DNS,如255.255.255.0)
ip nat inside
q
aaa authentication login default local enable
aaa authentication enable default enable
enable password 0 (登陆密码,可任意修改)
username admin password 0 (登陆密码,可任意修改)
ip dhcpd pool p1
network 192.168.0.0 255.255.255.0
range 192.168.0.4 192.168.0.250
default-router 192.168.0.1
dns-server (公网首选DNS) (公网备用DNS)
q
ip dhcpd enable
ip route defau (公网网关)
ip nat pool yyy (公网IP) (公网IP) 255.255.255.255
ip access-list standard a1
permit 192.168.0.0 255.255.255.0
q
ip nat inside source list a1 pool yyy overload
ex
write
版权声明:本文标题:烽火fr2600怎么web登录_烽火R2600路由器配置步骤及脚本文件 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dianzi/1726682639a1080815.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论