admin管理员组文章数量:1540636
//用户视图下输入重置交换机配置命令
<sw1>reset saved-configuration
//提示将删除交换机当前配置文件,是否继续,输入Y
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
//提示配置文件删除已清除
Warning: Now clearing the configuration in the device.
Jan 3 2024 16:59:07-08:00 sw1 %%01CFM/4/RST_CFG(l)[1]:The user chose Y when dec
iding whether to reset the saved configuration.
Info: Succeeded in clearing the configuration in the device.
//用户视图下输入交换机重启命令
<sw1>reboot
Info: The system is now comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the n
//输入N,回车继续
ext startup:, Continue?[Y/N]:n
Info: If want to reboot with saving diagnostic information, input 'N' and then e
xecute 'reboot save diagnostic-information'.
//继续执行重启命令
System will reboot! Continue?[Y/N]:y
Jan 3 2024 16:59:42-08:00 sw1 %%01CMD/4/REBOOT(l)[2]:The user chose Y when deci
ding whether to reboot the system. (Task=co0, Ip=**, User=**)
//重启完成,已恢复出厂配置
<Huawei>
小编,经过真机实操和仿真实验,确认以上命令易操作,可实现。
!!!特别提醒:在恢复出厂设置一定要提前备份设备配置,避免配置丢失造成其他损失。
版权声明:本文标题:华为路由器和交换机恢复出厂配置实操 内容由热心网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://m.elefans.com/dianzi/1727031433a1094873.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。
发表评论