admin管理员组文章数量:1642164
http://www.etsi/deliver/etsi_ts/123000_123099/123040/04.02.00_60/ts_123040v040200p.pdf
9.2.2.1 SMS DELIVER type
Basicelements of the SMS DELIVER type:
| Abbr. |
Reference |
P1) |
R2) |
Description |
| TP MTI |
TP Message Type Indicator |
M |
2b |
Parameterdescribing the message type. |
| TP MMS |
TP More Messages to Send |
M |
b |
Parameterindicating whether or not there are more messages to send
|
| TP-LP |
TP-Loop-Prevention |
O |
b |
Parameterindicating that SMS applications should inhibit forwarding orautomatic message generation that could cause infinite looping. |
| TP RP |
TP Reply Path |
M |
b |
Parameterindicating that Reply Path exists. |
| TP UDHI |
TP User Data Header Indicator |
O |
b |
Parameterindicating that the TP UD field contains a Header |
| TP SRI |
TP Status Report Indication |
O |
b |
Parameterindicating if the SME has requested a status report.
|
| TP OA |
TP Originating Address |
M |
2 12o |
Addressof the originating SME. |
| TP PID |
TP Protocol Identifier |
M |
o |
Parameteridentifying the above layer protocol, if any.
|
| TP DCS |
TP Data Coding Scheme |
M |
o |
Parameteridentifying the coding scheme within the TP User Data. |
| TP SCTS |
TP Service Centre Time Stamp |
M |
7o |
Parameteridentifying time when the SC received the message. |
| TP UDL |
TP User Data Length |
M |
I |
Parameterindicating the length of the TP User Data field tofollow. |
| TP UD |
TP User Data |
O |
3) |
|
1) Provision; Mandatory(M) or Optional (O).
2) Representation; Integer(I), bit (b), 2 bits (2b), Octet (o), 7 octets (7o), 2 12 octets(2 12o).
3) Dependenton the TP DCS.
9.3.2.2 RP‑MT‑DATA
Basic elements of the RP‑MT‑DATA type.
| Abbr. |
Reference |
P1) |
Description |
| RP‑PRI |
RP‑Priority‑Request |
+‑‑ |
Parameter indicating whether or not the short message transfer should be stopped if the originator SC address is already contained in the MWD. |
| RP‑MMS |
RP‑More‑Messages‑To‑Send |
OO‑ |
Parameter indicating that there are more messages waiting in the SC |
| RP‑OA |
RP‑Originating‑Address |
+++ |
Address of the originating SC. |
| RP‑DA |
RP‑Destination‑Address |
++‑ |
Address of the destination MS. |
| RP‑UD |
RP‑User‑Data |
+++ |
Parameter containing the TPDU |
| RP-MTI |
RP-Message Type Indicator |
O-- |
Parameter indicating if the TPDU is a SMS Deliver or a SMS Status Report2) |
| RP-SMEA |
RP-originating SME-Address |
O-- |
Address of the originating SME 2) |
1) Provision on the links SC<‑>MSC, MSC<‑>MSC or MSC<->SGSN,and MSC<‑>MS or SGSN<->MS indicated by"xxx", where x may be"+","‑" or"O", dependent on whether the parameter is mandatory, not present or optional on the respective
版权声明：本文标题：SMS 3GPP 相关协议 内容由热心网友自发贡献，该文观点仅代表作者本人， 转载请联系作者并注明出处：https://m.elefans.com/dianzi/1729332094a1196520.html， 本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。
发表评论