海康威视硬盘录像机快速安装指南说明书

admin管理员组

文章数量:1533920

2024年5月21日发(作者：)

1

Package Contents

Network Video Recorder Power AdapterHDD Screws

©2022 TP-Link 7106509913 REV1.0.1

Quick Installation Guide

PoE Network Video Recorder

Mouse

Quick Installation Guide

Rubber Feet (for some models)

*Images may differ from actual products. VIGI NVR1008H-8MP is used for demonstration in this guide

2

Product Overview

Front Panel

LED

SYS

LAN

Indication

On: System is running normally.

Off: System is running abnormally.

On:

Network is working properly.

Flashing:

Data is being transmitted or received

.

Off:

Network is malfunctioning.

On:

The HDD is normal.

Off:

No HDD or the HDD is malfunctioning.

On: The total PoE power reaches the warning threshold.

Flashing: The total PoE power has reached the warning threshold for more than 2 minutes.

Off: The total PoE power does not reach the warning threshold.

On: The port is supplying power normally.

Flashing: Overload or short circuit is detected.

Off: Not providing PoE power on the port.

On: A device is linked to the port but no activity.

Flashing: Transmitting or receiving data.

Off: No device is linked to the corresponding port.

Description

Connector for audio input and output.

Note: Audio input only supports microphones with power supply.

Output port for high-definition audio and video signals. Connect

your monitor to this port if it uses HDMI connection.

Output port for analog video signals.

Connect your monitor to this port if it uses VGA connection.

2 USB ports for additional devices such as USB mouse, USB storage device,

and USB keyboard.

RJ45 10/100Mbps self-adaptive Ethernet port.

Connect to an Ethernet device (eg. router and switch).

Designed to connect to the device with a bandwidth of 100/10 Mbps. The port

can also provide power for PoE PDs (recommended for PoE cameras).

Connector for power input.

HDD

PoE Max

LED

USB Port

Back Panel

PoE

Link / Act

AUDIO IN

VGALAN Port

Grounding Terminal

Interface

AUDIO IN /

AUDIO OUT

HDMI

VGA

USB

LAN

PoE

POWER

Kensington

Security Slot

AUDIO OUT

HDMI

USB PortPoE Port

POWER

Kensington Security Slot: Secure the lock (not provided) into the security slot to prevent the device

from being stolen.

Grounding Terminal: The device comes with lightning protection mechanism.

When installing for the first time, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of surveillance or enter-

prise level. Before installation, please disconnect the power from the network video recorder (NVR).

1. Remove the fixing screws on the side and back panels to open the

cover of the NVR.

3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert

the HDD interface into the slot.

3

Hard Drive Installation

2. Attach the 4 included HDD screws to your hard drive. Do not fasten.

Hard Disk Drive (HDD)

4. Flip the NVR upside down and fasten the HDD screws. Replace the

cover and fasten the screws of the NVR.

Follow the steps below to complete the hardware connection.

port it supports.

4

Hardware Connection

1. Connect your monitor to the HDMI or VGA port according to the connection

2. Connect your monitor to a power source and turn it on.

Monitor

or

Mouse

3. Connect the LAN port of the NVR to a network device with an Ethernet cable.

4. Connect the provided USB Mouse to the USB Interface of the NVR.

5. Connect the power adapter to the NVR.

If you want to turn off the NVR after installing the hard drive, right click on the Live View

The input voltage should match the power requirements of the NVR.

Cautions

PoE IPCs

screen and click the Power button on Main Menu of your monitor. Do not unplug it directly.

The buzzer on the NVR may be triggered when no hard drive is installed or the hard drive in

the NVR hasn’t been initialized. You can turn it off in Event-Exception Detection-Disk

Exception.

Network Device

USB Storage Device

(e.g. Router, Switch)

or Keyboard

NVR can add and manage cameras in batches.

5

Configuration

* Here we use TP-Link cameras as an example. For other camera brands, please refer to their User Manuals to add the cameras.

Step 1. Connect your cameras to the PoE ports of the NVR or the same

network as your NVR.

Step 2. Follow the instructions to finish Quick Setup.

Note:

Make sure your NVR can get access to the internet before binding.

If you don’t have a TP-Link ID, sign up first.

If your NVR fails to connect to the Internet, please refer to FAQ-Q3.

For more instructions, please refer to the NVR’s User Guide.

1. Create a login password for the NVR and a preset password for your unset cameras.

2. Click

Auto Initialize

and the NVR will automatically find and add the cameras in

your network.

Note: Enter an email address for resetting the password of NVR or cameras.

Step 3. Right click on the Live View screen to open the Main Menu for

management.

Note: If you don’t want to use Auto Initialize, click Manually Initialize and follow the

Setup Wizard to add cameras in your network and complete the setup.

1. Right click on the Live View screen and click Add Camera.

If you want to add a camera after Quick Setup, please follow the steps below:

2. Select a camera and click + to add your camera directly. If you have disabled Plug

and Play on your NVR, please create a password or use the preset password for

your unset camera.

Note:

The password preset for cameras in Quick Setup will be applied to your unset cameras.

2. Click Cloud Services on the top, enter your TP-Link ID and password, and click

Bind.

1. Right click on the Live View screen and click Settings.

(Optional) Step 4. Bind your NVR to a TP-Link ID for remote access and

management.

If your cameras have been activated, use the previous passwords to add and manage the

cameras.

If you can’t find your camera, refer to FAQ-Q2.

You can add and manage your devices via any of the methods below.

More Management Methods

View live video and modify NVR settings on your

computer.

Method 1: Via the VIGI Se

curity Manager

(Windows only)

Remotely view live video, manage NVR, and get instant

alerts.

1. Download and install the TP-Link VIGI app.

or

Method 2: Via the TP-Lin

k VIGI App

View live video and modify NVR settings via a web

browser.

1. Find the NVR's IP address on your router’s client page.

3. Select your Country/Region and Time Zone.

4. Set a password to activate the NVR.

2. On your local computer, open a web browser and enter

NVR’s IP address (192.168.0.240 by default).

Method 3: Via a Web Brow

ser

1. Download the VIGI Security Manager on your computer at

/support/download/vigi-security-

manager/.

2. Install the VIGI Security Manager and open it.

3. NVR on the same network as your computer can be

automatically discovered. Go to Settings > Discovered

Devices, click Add, and follow the instructions to add your

NVR.

2. Open the app and log in with your TP-Link ID. If you don’t

have an account, sign up first.

3. Tap the + button on the top right and follow the app

instructions to add your NVR.

Done. You can manage and change NVR settings, and add

cameras on the web management page.

Frequently Asked Questions

Q1. What should I do if I forget the login password of my NVR?

Safety Information

A2. Remove the cover, then press and hold the Reset button inside the NVR for over 3 seconds. The NVR will restore

to the factory settings. Then follow Quick Setup to create a login password.

A1. Click Forgot Password on the login page and then follow the instructions to reset the password.

Reset Button

This device is restricted to indoor use only.

Keep the device away from water, fire, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions,

please don't hesitate to contact us.

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

Place the device with its bottom surface downward. Install it at stable places, and prevent it from falling.

The power adapter must be used indoors. Make sure that the temperature of the power adapter is within 0-40°C.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF

USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This equipment is not suitable for use in locations where children are likely to be present.

Q2. What can I do if no cameras are found?

A1. Refresh to discover your cameras again.

A2. Make sure the cameras are powered on.

A4. Try to add your cameras manually.

*Some devices may be incompatible, such as wireless mouse.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will

occur due to improper use of the device. Please use this product with care and operate at your own risk.

A3. Make sure your cameras and NVR or computer are in the same network.

CAUTION!

Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of

flammable liquid or gas;

Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Q3. What can I do if my NVR fails to connect to the Internet?

A1. Check if the internet is working properly.

A2. Make sure your NVR is in the same network segment as your network devices, or select Auto as the mode to

configure the NVR to obtain a dynamic IP address. For more details, please refer to the NVR’s User Guide.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,

2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at /en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic

Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

The original UK Declaration of Conformity may be found at /support/ukca/

If you have more questions, please visit /support/faq/2850/.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

For technical support, the user guide and other information, please visit

/support, or simply scan the QR code.

To ask questions, find answers, and communicate with TP-Link users or engineers,

please visit to join TP-Link Community.

本文标签： 录像机安装硬盘指南