华为交换机配置命令

华为交换机的基本操作命令

设置日期和时间——时间对于交换机来说非常重要,时间不对很多功能无法实

现

clock timezone BJ add 08:00:00 ——在用户视图下输入此命令

clock datetime 13:45:30 2017-09-20 ----设置当前时间和日

期,24小时制

system-view ------进入系统视图

Huawei -----------进入系统视图后<>变成了

创建Vlan并把端口加入VLAN

Huaweivlan 2 ------------在系统视图下操作,创建Vlan 2

Huawei-vlan2 --创建了vlan2并进入vlan2

Huawei-vlan2quit --退出vlan2

Huaweivlan batch 3 to 20

--批量创建vlan 3到30

Info: This operation may take a few seconds. Please wait for a

done.

Huaweivlan batch 21 22 25

--批量创建vlan,创建了21,22,25三个vlan

Info: This operation may take a few seconds. Please wait for a

done.

Huaweiundo vlan 21 --删除vlan 21

Huaweiundo vlan batch 22 25 --批量删除vlan,删除22 和25

Warning: The configurations of the VLAN will be deleted. ContinueY/N:y

--询问是否真的删除

Info: This operation may take a few seconds. Please wait for a

done.

Huaweiinterface GigabitEthernet 0/0/2 --进入G0/0/2端口

Huawei-GigabitEthernet0/0/2port link-type access --更改端口的连接类

型为access

Huawei-GigabitEthernet0/0/2port default vlan 2 --更改端口的默认

vlan为vlan 2

Huaweiport-group 3-10

--创建了一个名为3-10的端口组,并进入这个组

Huawei-port-group-3-10group-member

GigabitEthernet 0/0/10

-- 在组内,将G0/0/3 到 G0/0/10端口抓进来

Huawei-port-group-3-10port link-type access --一条命令可

以修改端口组内所有端口的属性

Huawei-GigabitEthernet0/0/3port link-type access

Huawei-GigabitEthernet0/0/4port link-type access

Huawei-GigabitEthernet0/0/5port link-type access

Huawei-GigabitEthernet0/0/6port link-type access

Huawei-GigabitEthernet0/0/7port link-type access

GigabitEthernet 0/0/3 to

Huawei-GigabitEthernet0/0/8port link-type access

Huawei-GigabitEthernet0/0/9port link-type access

Huawei-GigabitEthernet0/0/10port link-type access

Huawei-port-group-3-10

Huawei-port-group-3-10port default vlan 3

Huawei-GigabitEthernet0/0/3port default vlan 3

Huawei-GigabitEthernet0/0/4port default vlan 3

Huawei-GigabitEthernet0/0/5port default vlan 3

Huawei-GigabitEthernet0/0/6port default vlan 3

Huawei-GigabitEthernet0/0/7port default vlan 3

Huawei-GigabitEthernet0/0/8port default vlan 3

Huawei-GigabitEthernet0/0/9port default vlan 3

Huawei-GigabitEthernet0/0/10port default vlan 3

Huawei-port-group-3-10

Huaweiundo port-group 3-10 --如不再需要这个端口组,可以解散

Huaweidisplay port vlan --显示端口和Vlan的关系

Port Link Type PVID Trunk VLAN List

-------------------------------------------------------------------

------------

GigabitEthernet0/0/1 hybrid 1 -

GigabitEthernet0/0/2 access 2 -

GigabitEthernet0/0/3 access 3 -

GigabitEthernet0/0/4 access 3 -

GigabitEthernet0/0/5 access 3 -

GigabitEthernet0/0/6 access 3 -

GigabitEthernet0/0/7 access 3 -

GigabitEthernet0/0/8 access 3 -

GigabitEthernet0/0/9 access 3 -

GigabitEthernet0/0/10 access 3 -

GigabitEthernet0/0/11 hybrid 1 -

GigabitEthernet0/0/12 hybrid 1 -

设置Vlanif的IP地址

交换机是二层设备,不能直接给某个端口指定IP地址,但可以给Vlan

interface这个虚拟的接口设置IP地址

Huaweiinterface vlanif 1 --进入vlanif 1

Huawei-Vlanif1

保存交换机的设置

save --在用户视图下,输入save

The current configuration will be written to the device.

Are you sure to continueY/Ny --这里提示是否继续保存配置

Info: Please input the file name .cfg, .zip :

Apr 23 2017 15:21:07-08:00 Huawei %%01CFM/4/SAVEl0:The user chose Y

when dec

iding whether to save the configuration to the device. --首次保

存时,会在此处暂停,等待输入文件名.如不输入,直接回车,则配置信息会默认

保存成,并设置为下一次启动时使用的文件.如果输入了自定义的文件名,则这

个文件被设置成下次启动时使用的文件.

Now saving the current configuration to the slot 0.

Save the configuration successfully.

两台交换机互连,所使用的端口类型,设置为trunk也可设置成hybrid;如果没

有划分更多的vlan,也可设置成access,不过既然使用智能交换机,不可能不

划更多的vlan

interface GigabitEthernet0/0/1 //建立一个新用户,名称是

admintelnet ,密码是1234Huawei

HUAWEI-aaalocal-user admintelnet service-type telnet //设置用户的服

务类型是telnet

HUAWEI-aaalocal-user admintelnet privilege level 3 //设置用户级别为

3级

保存